You will Lead and drive the R&D activities of the Company and play a lead Role in developing New business models. 
You will have: 
Doctorate in electronics / communication with excellent knowledge of VoIP & communication domain. Good background of ASIC design and software design, highly conversant with DSP and voice processing. Should hold to the credit, patents and research projects.
Top Of this page                               E'mail Your Resume for this position
Program Manager
You will: Interact with multiple agencies working on different tasks, towards achieving a common goal. 
You will have: 
An engineering degree with an excellent track of scheduling, managing and coordinating multiple projects, with exposure to requirement definition, system architecture, and taking design from initial concept through production for communication systems application. Good exposure to leading project management tools & procedures is a definite plus. Should have exposure to semiconductor ASIC / Embedded software project life cycle. Should possess good people skills.
Top Of this page                               E'mail Your Resume for this position

Chip Architects

 Architects With more than 5 years experience in 
Digital IC architecture 
Micro architecture 
Verification methodology 
Proven working chips 
Top Of this page                               E'mail Your Resume for this position

Project Managers - Design
With more than 5 years experience in 
RTL design 
Verification 
Synthesis 
Timing closure

Top Of this page                               E'mail Your Resume for this position

Project Manager ASIC
With more than 5 years experience in 
Physical design methodology 
Place & route experience 
Extraction & verification 
Supported by multiple tape outs 
Top Of this page                               E'mail Your Resume for this position
Engineers : Front End Design
You have design experience in
* Verilog coding & test benches 
* Synthesis and timing closure 
* Use of RISC/ DSP processor hardware 
* Architecture of large ASIC’s
Physical Design 
You have participated in ASIC tape outs doing 
* Place and route 
* LVS, DRC 
* Extraction – back annotation At 1.0 micron technology or better 
Test & Product Engineering
Worked on IC testing having 
* Developed test programs for Sentry 21/21, 
Credence Vistavision, HP, LTX, etc., 
* Tested chips for continuity, leakage, function, stress, 
Idd, VOH / VOL, VIH/VIL, etc. 
* Load board, probe card design
Top Of this page                               E'mail Your Resume for this position

REAL TIME EMBEDDED SOFTWARE
Software Engineer - Telecom
Worked on DSP’s with * Knowledge of DSP architecture and programming 
* Communication software development using DSP 
(TI, ADI, etc.) 
* Algorithm development skills in the field of audio / 
video processing 
* Familiarity with ITU specifications such as H.32x, 
G.7xx, V.xx
Top Of this page E'mail Your Resume
Top Of this page                               E'mail Your Resume for this position

Software Engineer  – Networking

 Worked on networking SW development, 
* Embedded software development for 16/32 
RISC/ CISC using C, C++, Assembly 
* Experience with RTOS (VxWorks, pSOS, Nucleus, 
ThreadX etc) 
* Working knowledge of network protocols: IP, FR, 
ATM. Familiarity with ITU specifications such as 
H.32x, G.7xx, V.xx, SNMP, RTP, SS7, ISDN etc.
Top Of this page                               E'mail Your Resume for this position

Engineer Board Development Group 
Required Skills 
1. Good understanding of Board design / development issues 
2. Expertise in FPGA ‘s using Altera / Xilinx tools 3. Porting / mapping of Hardware IP’s to FPGA devices 4. Schematic entry using OrCad, Parts selection, Timing verification 
5. Board design using CAD tools, like OrCad 
6. Usage of spectrum analyser, logic analyser 
7. Proven expertise in development and testing of high speed board 
8. Exposure to Verilog / VHDL 
9. Project management skills 

Desirable 
1. FCC testing 
2. Working knowledge of Synplicity tool 
3. Good knowledge of testing & debugging, development of diagnostics 
4. Good working knowledge of telecommunication / embedded domain 

Job Description 
To manage to the board development activities, and to interact with the system architecture group & ASIC team, port / map different Hardware IP’s into FPGA devices. Work on schematic entry to design prototype of ASIC on board. Interact with Software team to boot up board & development of diagnostics.Top E'mail Your Resume
Top Of this page                               E'mail Your Resume for this position

Position 1 : Senior RF IC Design Engineers
**Location: Singapore

Job Responsibilities:
- Design of circuit building blocks for RFIC solutions;
- High performance circuit development for RF transceiver, frequency synthesizer and VCO.

Requirements:
- > 6 years of relevant working experience;
- B.Eng / Masters Degree / Ph.D with major in EE or Telecommunication Engineering, particularly, in the related fields of Analog or RFIC designs;
- Experienced in designing a wide range of circuit functions for RFIC, such as
- RF circuits – LNA, Mixer, Modulator, RF PGA, Power Amplifier, etc.
- Frequency synthesizer – Integer-N or Fractional-N PLL, PFD/CP, VCO, Crystal Oscillator, frequency/phase calibration algorithm, etc.
- Analog circuits – VGA, Filter techniques, ADC/DAC, etc.
- Strong analytical skills in optimizing a particular Analog/RFIC circuit topology to meet its block level specifications;
- A good understanding of CMOS and Bi-CMOS process technology;
- Solid foundation in RF theory and circuit analysis.
Please click this Link to  email your resume for this position   with full contact details and  telephone numbers. Please indicate your current Salary, Expected Salary and Joining time required, if selected for the position

Position 2 : Senior Analog IC Design Engineers
**Location: Singapore

Job Responsibilities:
- Define IP block specifications based on system architecture and product application requirements.
- Responsible for the circuit design simulation, prototype evaluation and verification.

Requirements:
- B.Eng / Masters Degree / Ph.D with major in EE or Telecommunication Engineering, particularly, in the related fields of Analog circuit designs.
- Experienced in designing circuit functions for mix-signal circuit design, such as ADC / DAC / PGA / PLL / Filter / SERDES, etc.
- Strong analytical skills in optimizing a particular Analog circuit topology to meet its block level specifications.
- A good understanding of CMOS process technology.
- Solid foundation in circuit analysis.
- Good skill in Cadence composer / Spectre and Spectre-RF / MATLAB
- Minimum 5 years of experience in mixed signal SOC design.

Please click this Link to  email your resume for this position   with full contact details and  telephone numbers. Please indicate your current Salary, Expected Salary and Joining time required, if selected for the position

Position 3 : Senior System Design Engineer
**Location: Singapore

Job Responsibilities:
- RF IC architecture design
- RF IC noise, gain and linearity analysis
- RF IC frequency planning
- RF IC calibration and test algorithms
Requirements:
- MS/MEng, PhD in EE with emphasis on RF-related design fields
- > 5 years of RF design experience
- Strong design background in RF circuits, especially in RF IC designs
- Design experience using advanced system level CAD tools (CADS/MATHLAB/MWO)
- A good understanding in wireless communications protocols (GSM/EDGE/WCDMA/WLAN/DTV/BLUETOOTH)
- Familiarity with CMOS and Bi-CMOS process technology is preferred
- Experience with type-approval testing
- Experience with wireless transceiver architectures design.

Please click this Link to  email your resume for this position   with full contact details and  telephone numbers. Please indicate your current Salary, Expected Salary and Joining time required, if selected for the position

Position 4 : Senior Physical Design Engineers
**Location: Singapore


Job Responsibilities:
- In Charge of Digital Back-end Physical Design and automation;
- Main responsibilities include circuit synthesis, physical synthesis, static timing analysis, chip floorplanning, auto place and route, capacitance and resistance extraction, design rule checking and delay back-annotation;
- Responsible for clock tree synthesis, scan chain generation, critical path timing analysis and power analysis.

Requirements:
- > 5 years of relevant working experience.
- BS or above with major in EE or Computer Science related field;
- Familiar with floorplan, timing driven placement/routing, CTS, and LVS/DRC design flow and be capable of running projects independently;
- Experience of tapeout with 018um and below process;
- Experience of hierarchy design flow preferred;
- Experience with DSM IC design or process, and familiar with device modeling, crosstalk, IR drop analysis, preferred.

Please click this Link to  email your resume for this position   with full contact details and  telephone numbers. Please indicate your current Salary, Expected Salary and Joining time required, if selected for the position

Position 5 : Device Modelling Engineer
**Location: Singapore


Job Responsibilities:
- Active and passive device modelling for CMOS, BiCMOS and SiGe BiCMOS RFICs;
- On-wafer characterization of active and passive RFIC components including parameter extraction, verification, characterization;
- Provide model and technology support to RFIC design teams;
- Test chip design and new test structure development for RF model parameter extraction;
- Characterization of IC packages

Requirements:
- Master's or PhD in Electronic Engineering;
- >5 years experience in RF / microwave device modelling, and test/measurement. ;
- Practical knowledge of the mathematics and semiconductor physics of high performance transistor models;
- Proficient with network analyzer, spectrum analyzer, load pull and noise parameter measurements;
- C++ programming, data manipulation, and general troubleshooting;
- Strong communication skills